Accessories
|
Mounting Brackets |
|
| Dotworkz EZ Lock Pole Mount Adapter |
|
|
Dotworkz EZ Lock Pole Mount Adapter is a feature rich mounting adapter. Easily secures to poles with a minimum of ¾" diameter. An Angle Correction Plate can be added to correct the angle of the enclosure up to 10 degrees for non plum poles, it also has Component Attachment antenna mounts for adding additional Omni or yogi antennas.
|
|
| - |
|
Dotworkz Tilt Angle Correction Plate Add-On |
Dotworkz D2 Accessory Component Mounting Plate |
Corner Adapter |
|
|
|
| This Adapter is used to correct or change angles of the enclosure when mounted to a pole. |
Dotworkz D2 Accessory
component mounting plate |
Constructed of aluminum, the ACA2 is a corner mount bracket designed to work with most outdoor housings, incluiding the Dotworkz D2.
|
|
|
| - |
| |
Mounting Brackets |
|
| Corner Wall Rotating Bracket |
|
|
The SRM1500 is a three-piece heavy-duty bracket that secures directly to the corner of a building. The camera can be easily serviced by rotating the unit back in over the roof. The SRM1500 includes a pre-drilled mounting plate and cable access holes.
- Raises camera above roofline
- Durable powder coat finish
- Heavy-gauge steel for maximum stability
- Housing serviced in upright position
- 150 lb load rating
|
|
| |
Mounting Brackets |
|
| Flip Over Roof Mount Bracket |
|
|
The PA2 is designed to allow camera housings to be mounted below the roofline. There is a pivot point on the mount, allowing the unit to be flipped back over the roof for servicing.
The PA2 is compatible with Dotworkz D2 which attach directly to the mounting face plate.
- Lowers dome below roof line, flips back over roof for servicing
- Heavy-gauge steel for maximum stability
- Durable powder coat finish
- 150 lb load rating
|
|
| |
Mounting Brackets |
|
| Raised Flat Surface Roof Top Bracket |
|
|
The SRCW2000 heavy duty mount is designed for either parapet or flat roof applications, allowing the camera to be raised above the roofline.
Service can be accomplished by rotating the unit in over the roof, compatible with Dotworkz D2 which attach directly to the mounting face plate.
- Raises camera above roof line, rotates in for servicing camera
- Heavy-gauge steel for maximum stability
- Durable powder coat finish
- 150 lb load rating
|
|
|
