ELECTRICAL SERVICE:

Ethernet

Signal Voltage ………………………………………………………………………………….. 55 VDC

Transfer rate ………………………………………………………………………………………..CAT-5

Configuration……………………………………………………………………………………….. 2 pair

Input Connection …………………………………………… Screw-Term Block (24-16 AWG)

Protection Modes…………………………………………………. Line to Line, Line to Ground

Maximum Continuous Operating Voltage ………………………………………….. 90 VDC

VDC

Service Voltage ………………………………………………………………………………… 55 VDC

Configuration………………………………………………………………………………. up to 4 wire

Input Connection ………………………………………….. Screw-Term. Block (24-16 AWG)

Protection Modes…………………………………………………. Line to Line, Line to Ground

Maximum Continuous Operating Voltage ………………………………………….. 90 VDC

Reset Wire/LED Signal Wire

Service Voltage ………………………………………………………………………………… 55 VDC

Configuration………………………………………………………………………………… 1 wire (ea)

Input Connection ……………………………………………. Screw-Term Block (24-16AWG)

Protection Mode…………………………………………………… Line to Line, Line to Ground

Maximum Continuous Operating Voltage …………………………………………… 90VDC

ELECTRICAL PERFORMANCE:

3Tested to IEEE/ANSI C62.41 10/1000ms Long Wave

Peak Current………………………………………………………………………………….150A peak

Voltage Protection Level ………………………………………..130Vpk @ 150A 10/1000ms

Tested to IEEE/ANSI C62.41 8/20ms Combination Wave

Peak Current………………………………………………………………………………..1500A peak

Voltage Protection Level ……………………………………………152Vpk @ 1500A 8/20ms

Peak Power Dissipation …………………………………………………………………….20,000 Watts

Response Time (Max.)…………………………………………………………………….5 nanoseconds

ENVIRONMENTAL:

Operating Temperature:………………………………………………………………….-40°C to +80°C

Storage Temperature: …………………………………………………………………….-40°C to +80°C

Relative Humidity:…………………………………………………………………99%(non-condensing)

Refer to Transtector Installation Instruction document 1200- 148 for further information regarding the installation of this product.

Enclosure dimensions: The suppressor is housed in a molded plastic enclosure that is 6.13 in long, 4.5 in wide and 2.5 in tall.

Mounting data: The enclosure mounts with #6 hardware.

Wiring data: The ALPU-ALVR surge suppressor is designed to accept (2) multiconductor cables with outside diameters of up to 0.375″.